Selkirk Ultra Temp 8 Inch Chimney Pipe

9 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$115.75

ID#: C1678945

12 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$126.57

ID#: C7542400

18 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$144.10

ID#: C1543164

24 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$196.36

ID#: C7542996

36 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$260.50

ID#: C6176127

48 Inch Straight Pipe

Stainless steel inner and outer pipe. All insulated pipe lengths are furnished with a Locking Band. Secure twist-lock design couples chimney sections together with just a 1/8 turn. To calculate installed length, subtract 1-1/4 Inch per joint. Insulated chimney requires 2 Inch clearance to combustible material.

$295.73

ID#: C9277849

Locking Band

Versatile, simple device for increasing stability of a chimney. Inward flanges around the band fit into grooves at chimney length joints. Reinforces joints of chimney and prevents accidental uncoupling. Locking Band is included with all insulated lengths, tees and elbow kits. Made of stainless steel.

$15.61

ID#: C9661174

Finishing Collar

The Finishing Collar fits over lower end of suspended insulated chimney pipe to provide finished appearance. Black Matte Finish.

$27.78

ID#: C3979903

Storm Collar

Designed to fit on the round chimney pipe just above the roof flashing. The upper edge of the collar should be waterproofed with nonhardening silicone caulking to prevent any water from leaking between the collar and chimney pipe. Part is tightened with screws or tabs after proper positioning.

$19.15

ID#: C0272005

Wall Band

The Wall Band is used along the wall to provide for 2 inch clearance and assure stability. Required at 8 foot or closer intervals above the tee to stabilize the chimney. Stainless steel construction.

$43.83

ID#: C5144365

Chimney Pipe Adapter

The Chimney Pipe Adapter is used to connect Ultra-Temp or Galva-Temp to either Double Wall or Single Wall Stove Pipe. The 6" CPAs provide proper connection to Selkirk's Double Wall Stove Pipe Models USP and DSP. Finishing bands are available.

$34.78

ID#: C4771358

Anchor Plate

The Anchor Plate provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Retains chimney with a twist-lock connection.

$86.66

ID#: C1104280

Insulated Chimney Tee With Cap

Allows the horizontal connection of the chimney to the appliance. Can be used on the interior or exterior of the building, in combination with a Wall Support Assembly. The Tee Cap provided allows access for inspection and cleaning. Includes Locking Band.

$352.16

ID#: C7286958

Firestop Joist Shield

Prevents or delays the rapid spread of fire (regardless of the cause) in a home or building. The sheet metal firestop prevents the chimney passageway from becoming an easy pathway for fire to spread from one floor to another. Used in floor/ceiling penetrations other than those which include a ceiling support. Not required when passing through roof.

$51.65

ID#: C6834741

Trim Plate Spacer

Used to trim the ceiling, closing off the airspace around the pipe when the chimney is supported from above & extended down into the room. Used to trim the wall when chimney passes through a non-combustible wall. Used in conjunction with the Firestop/Joist Shield. Black Matte Finish.

$60.94

ID#: C1273788

Attic Insulation Shield

The Attic Insulation Shield is used wherever the chimney enters an open attic. The Attic Insulation Shield acts as an insulation shield to keep blown in or blanket insulation from filling in any framed opening or contacting the chimney and possible storage of combustibles against the chimney.

$104.82

ID#: C4688297

Dripless Stove Pipe Adapter New Installation

Dripless Stove Pipe Adapters are designed to slip inside single wall stove pipe to contain any creosote dripping down the chimney to inside the stove pipe. This adapter is for use in new installations. Made of 430 Stainless Steel.

$88.65

ID#: C0305680

Insulated Wall Thimble

The Insulated Wall Thimble installs quickly and eliminates the need for using individual firestops. The two sections telescope to accommodate 6 Inch to 11 Inch wall thickness. Interior wall plate painted black.

$71.82

ID#: C5854898

Square Ceiling Support

With proper framing, all ceiling supports assure at least 2 Inch minimum clearance to combustibles at the support level and can carry up to 50' of vertical chimney height. Please note: This is the square ceiling support. We also offer the round ceiling support.

$125.68

ID#: C2013035

Round Top

The round top is designed with a dome to exclude rain and leaves and a lower skirt to deflect wind for proper chimney draft. Designed with three legs that slide down over the outside of the chimney.

$154.13

ID#: C8464554

Universal Spark Arrestor

Preformed for easier installation. Fits same size round chimney top. Keeps foreign objects out of chimney. Diamond shaped 1/2 inch x 1 inch mesh, 18-8 stainless steel.

$30.95

ID#: C7057367

Adjustable Flashing 2/12 To 6/12 Pitch

Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system. This adjustable flashing works with 2/12 To 6/12 Pitch roofs.

$103.29

ID#: C1578699

Adjustable Flashing 6/12 To 12/12 Pitch

Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system. This adjustable flashing works with 6/12 To 12/12 Pitch Pitch roofs.

$124.16

ID#: C3286291

Universal Roof Support Assembly

This new design gives you the flexibility of securing the 5", 6", 7" or 8" diameter chimney with a heavy duty band. The band allows you to slide the installed length vertically to properly position this section in the system. Installation requirements are the same as our standard RSP. The URSA can hold 30' of pipe total - up to 20' can be below.

$77.40

ID#: C6342273

15 Degree Insulated Elbow Kit

Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Required locking bands (2 packaged with each elbow kit) allow 360 deg rotation and lock the components together in place at the exact offset required. Includes 2 elbows, 2 locking bands and interior resupport.

$339.30

ID#: C9020744

30 Degree Insulated Elbow Kit

Can be used for fixed offsets of 30 deg slope. Required Locking bands (2 packaged with each elbow kit) are to be used at each joint. Each offset must be resupported. Elbows rotate 360 deg to provide the exact orientation required. Kit includes 2 elbows, 2 locking bands and one interior resupport.

$439.61

ID#: C2405017

Universal Rubber Boot Flashing Kit

Flashing is used to seal the opening where the chimney penetrates the roof to divert rain and snow down from the roof and away from the chimney system. Used for installations on corrugated roofs flat to 12/12 pitch. Kit includes rubber boot (23-4/5 Inch x 21-1/2 Inch), spacers kit, special storm collar, shield, and mounting screws. To determine your roof pitch, measure the number of inches from the end of a level 12” ruler down to the roof. This is the rise for 12 inches of run. A rise of 5 inches is a 5/12 pitch. . .4 inches, a 4/12 pitch, etc.

$286.99

ID#: C8489635

Flat Ceiling Support Kit

Provides the support package and termination parts for a chimney that is supported by a flat ceiling and passes through an attic area and penetrates a 2/12 to 6/12 pitch roof. Just add pipe lengths and the Flat Ceiling Support Kit has all necessary parts for complete installation. However, depending upon your roof design and the position of your chimney on the roof, it may be necessary to install a roof brace kit to provide required support for your chimney above the roof. Kit includes Round Top, Attic Insulation Shield, Storm Collar, Finish Support Package, Adjustable Flashing, Smoke Pipe Adapter.

$571.84

ID#: C5892906

Pitched Ceiling Support Kit

For installation of a chimney in a cathedral or pitched ceiling such as standard A-Frame construction. The Pitched Ceiling Support Kit provides all necessary parts for a complete installation with the exception of the required insulated pipe lengths and adjustable flashing. Selection of the Adjustable Flashing is determined by the pitch of your roof. Depending on the height of pipe above the roof, a Roof Brace Kit may be required. Kit includes Round Top, Storm Collar, Finishing Collar, Roof Support Package, Adjustable Pitched Ceiling Plate, Smoke Pipe Adapter.

$464.26

ID#: C7506504

Thru-The-Wall Support Kit

For a wall-supported chimney system with a horizontal connector passing through an exterior wall, connecting to a Tee and running verticaly up the exterior wall to termination above the roof line. Kit includes Round Top, 12 Inch Insulated Pipe Length, Wall Band, Insulated Tee/Plug, Finshing Collar, Wall Support Kit, Chimney Pipe Adapter, Insulated Wall Thimble.

$993.75

ID#: C9518648

Wall Support Kit

The Type HT wall support kit has been tested for use fully enclosed and has been designed in various chimney pipe sizes to carry up to 60 ft of height at 2 inches from the wall. The wall support is intended for use with the Insulated Tee as an interior or exterior support where the chimney has a lateral connection. It is also useful where the pipe connection passes through a combustible interior or exterior wall. Braces may be fastened to the wall either above or below the plate for chimneys which penetrate through the wall.

$98.59

ID#: C6860191

Roof Support Kit

Fits all roof pitches and requires only simple framing. Brackets and mounting hardware only. May be attached to any standard pipe length

$65.52

ID#: C8489627

Roof Brace Kit

Used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and to prevent damage from static and sliding snow. It should be used, at a midpoint on the chimney. Bracket adjusts from 4 to 7 1/2 feet.

$113.01

ID#: C8652869

Roof Support Package

An ideal support assembly for open cathedral ceiling installations. Fits all roof pitches and requires only simple framing. Mounts easily on to top of roof through opening that allows 2 Inch clearance. Maximum length of chimney which can be suspended below is 20' supported. Maximum total length is 30'. The Roof Support Package contains one 18 Inch length of pipe, roof brackets and necessary hardware. The brackets may be assembled to any standard pipe length at any desired height. Locking bands must be used at each pipe joint.

$191.02

ID#: C5333497