Aladdin Lamp Parts

Replacement Parts for most Aladdin Lamps. These are not genuine Aladdin Lamp Parts but aftermarket parts built to the same standards and quality. Repair and revive your Aladdin Lamp for years of use and enjoyment.

Some of these products can expose you to chemicals which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/

Aladdin Brass Oil Lamp Shade
Height - 3 1/2"
Bottom Diameter - 10 1/4"
Top diameter - 2 3/4"
Built for Aladdin Burners/Lamps | Fits Models 7-23 (1080BR)

$30.99

ID#: OBP10736

Aladdin Nickel Oil Lamp Shade
Height - 3 1/2"
Bottom Diameter - 10 1/4"
Top diameter - 2 3/4"
Built for Aladdin Burners/Lamps | Fits Underneath Models 7-12, A, B, C, 21C, & 23

$24.99

ID#: OBP10739N

Aladdin Lamp Shade Holder
Height - 2"
Bottom Diameter - 10"
Top diameter - 3 3/8"

$44.23

ID#: OBP10733

Aladdin Lamp Shade Holders
Height - 3 1/4"
Top diameter - 2 11/16"
Bottom Diameter - 10 1/4"

$44.23

ID#: OBP10739

Aladdin 10 Inch Brass Plated Steel Oil Lamp Tripod
Interior Diameter - 3 1/8"
Height - 1 1/2"
Designed to fit some Aladdin Brand burners

$5.76

ID#: OBP12795

Aladdin 10 Inch Nickle Plated Steel Oil Lamp Tripod
Interior Diameter - 3 1/8"
Height - 1 1/2"
Designed to fit some Aladdin Brand burners

$8.06

ID#: OBP12795N

Aladdin 12 Inch Brass Plated Tripod
Height - 3"
Top interior diameter - 2 1/16"
Tripod features brass-plated arms and fits underneath (base/thread portion) the Aladdin burner on models 7-12, A, B, C, 21C, & 23.

$30.49

ID#: OBP12720

Aladdin 14 Inch Nickle Plated Tripod
Height - 4"
Top interior diameter - 2 1/16"
Designed to fit underneath Aladdin brand burner models 7-12, A, B, C, 21C & 23

$12.65

ID#: OBP12793N

Aladdin Brass Oil Lamp Filler Cap
Top Diameter - 7/8"
Solid brass, unfinished. A filler cap with rubber gasket built to fit Aladdin Brand fonts and lamps made from 1930-1950s.

$18.99

ID#: OBP20804

Aladdin Nickle Oil Filler Cap
Top diameter - 7/8"
Nickel filler plug fits many Aladdin Brand metal fonts

$19.74

ID#: OBP20804N

Aladdin Lamp Filler Cap
Top Diameter - 1"
The corked-lined brass filler cap fits most Aladdin Brand glass fonts.

$10.99

ID#: OBP20807

Aladdin Flame Spreader
(Aladdin's No. N106) Fits Models 12, A, B, C, 21C and 23.

$23.69

ID#: OBP20801

Kone Kap Mantle Adapter
Designed to work on Models 3-11 by allowing Aladdin R150 (29800) LoxOn Mantle to fit on earlier models that formerly used a N146 Kone Kap Mantle.

$20.71

ID#: OBP29801A

Aladdin Wick Cleaner
Base Diameter - 7/8"
Height - 7/8"
Built to fit all Aladdin Brand oil lantern burners except Model 1. Will clean wick and wick tube flange.

$7.99

ID#: OBP20795

Aladdin Wick Trimmer
Top diameter - 3/4"
Height - 1 1/8"
Wick Trimmer (Aladdins No. R111) Works with all Aladdin burners produced with 1" wicks (Models 1 thru 23).

$12.45

ID#: OBP20810

Aladdin Light Booster Chimney Extension
Height - 3 3/4"
Top diameter - 2"
Bottom Diameter - 2 1/8"
Chimney Extension, required for burning at 4000 feet elevation. Adds up to 25% additional light output. Height 3 3/4" x 2 1/8" O.D. May be used on Aladdin Brand models A,B,21,21C & 23 burners, (N108B).

$37.41

ID#: OBP22804

Aladdin Smoke Bell
Bottom Diameter - 3 1/8"
Center hole - 3 mm
Smoke Bell built to fit Aladdin Brand model 12 hanging lamps. Solid Brass.

$10.58

ID#: OBP17984

Aladdin Wick Raiser
Height - 2 1/4"
Wick Raiser (Aladdin's No. N233) Fits Model 23.

$19.35

ID#: OBP20803

Customer Service

CALL US 1-800-251-8824

Ordering FAQ