Red Hill General Store
Call to order toll free 1-800-251-8824
Shopping Cart

Stainless Steel 8 inch DuraVent DuraBlack Single Wall Stove Pipe

Single wall stove pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney. For an economical, drip-free, single-wall stovepipe, DuraBlack SS is an excellent choice. Built to high standards, DuraBlack SS is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. Please note: All of the Stainless Steel 8 inch DuraVent DuraBlack Single Wall Stove Pipe on this page is 24 gauge.

430 alloy stainless steel
18" clearance to combustibles
24 gauge steel construction
Lock-seamed

This item is not available for our Ship to Store Service
Order Item
12" Straight Pipe
8" X 12"
Ocp115025
$56.99
7.1 lbs
Add to Cart
24" Straight Pipe
8" X 24"
Ocp115026
$66.49
7.6 lbs
Add to Cart
48" Straight Pipe
8" X 48"
Ocp115028
$103.99
10.3 lbs
Add to Cart
90 Degree Elbow
8"
Ocp115032
$79.49
6 lbs
Add to Cart
Slip Connector
8"
Ocp284038
$86.49
5 lbs
Add to Cart
Stovetop Adaptor
8"
Ocp115031
$67.99
6 lbs
Add to Cart

Stainless Steel 8 inch DuraVent DuraBlack Single Wall Stove Pipe

DuraVent DuraVent Approved Internet Seller

Description of available pieces
Straight Pipe -
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
45 degree Elbow - Offsets obstructions as needed. Adjustable.
90 degree Elbow - Offsets obstructions as needed. Adjustable. Not recommended for rear exit appliances.
Slip Connector - Use to adapt DuraBlack pipe to ceiling support box or finishing collar. Adds 3” - 13” of length to rigid pipe. Allows drip-free
installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe.
Stovetop Adaptor (Starter Pipe) - Use to adapt DuraBlack stovepipe to appliance flue outlet.
Tee with Clean-Out Cap - Use with rear exit appliances and appliances that require a barometric damper.
Spacer Line
Frequently asked questions about Stove Pipe

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page

M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech®, DuraPlus HTC®, DuraChimney® II, PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal® W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent’s relining products including DuraLiner®, DuraFlex® (SW, Pro, 316, 304), and Ventinox®.

• Any M&G DuraVent product sold by a non-approved website will not be warranted.

• Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent.

• Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent’s trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy.


Spacer Line
Find us on Twitter Follow us on Facebook Read our Red Hill General Store Blog Visit our Channel on Youtube Secure Ordering Privacy Policy Stainless Steel 8 inch DuraVent DuraBlack Single Wall Stove Pipe