Click here for frequently asked questions about Stove Pipe

Black 8 inch DuraVent DVL Double Wall Stove Pipe

DuraVent's DVL’s double-wall, air-insulated design reduces clearances to combustibles from 18” to 6”, the closest clearance to a wall of any connector pipe. DVL improves stove performance by maintaining high flue gas temperatures for a strong, steady draft. Because the inner wall is stainless steel the flue heats up faster, stays hot longer, minimizes the formation of creosote, and has the same life expectancy as the chimney. Adjustable lengths eliminate the need for cutting or crimping. Select Dura-Vent double-wall stove pipe for improved stove performance, and a decorative finishing touch. DVL double-wall stovepipe is engineered for enhanced safety and superior stove performance. The DVL double-wall air insulated design reduces clearance to combustibles. DVL improves stove performance by maintaining high flue gas temperatures for a strong, steady draft. Featuring an inner wall of .016 430 alloy stainless steel and an outer wall of .018 aluminized steel painted black. (Outside diameter is 1 1/8" larger than inside diameter) This pipe lets you reduce clearance from combustibles to the stove pipe from 18" down to 6" for walls and 8" for ceilings. Connecting pipe sections together is easy with predrilled holes and included screws. Drip-free design, no cutting or crimping. UL Listed to 2100° F. Limited manufacturer's 25 year warranty. Please note: All pipe pieces have a 1" overlap connection reducing the pipe length by 1". Double Wall Stove Pipe cannot be cut and still provide a proper connection to an adjoining piece of pipe. If necessary use an adjustable length of double wall stove pipe.

Description of available pieces
Straight Pipe - Constructed with a stainless
steel inner wall for long-lasting performance and safety. For mobile home installation, follow the appliance manufacturer’s installation instructions. Features a inner wall of .016 430 alloy stainless steel and an outer wall of .018 aluminized steel (Outside diameter is 1 1/8" larger than inside diameter).
45 degree Elbow - Offsets obstructions as needed. Elbow is not adjustable.
90 degree Elbow - Angles DVL pipe towards the chimney’s thimble or the appliance flue outlet. Elbow is not adjustable. Not recommended for rear exit appliances.
Stovetop Adaptor (Starter Pipe) - Connects DVL pipe to the appliance flue outlet. The overall height of the adaptor is 4 3/4". When the male end is properly seated into the flue outlet, 4" of actual connector length will remain. Item is available with optional damper.
Tee with Clean-Out Cap - Use with rear exit appliances and appliances that require a barometric damper.
Telescoping Length - Great for one piece installation. Simply adjust to the length you need. Allows one-piece installation from stove to ceiling support box or finishing collar. Available in 29"- 48" and 40"- 68" extensions. Easy to install, no cutting required.
Adjustable Length Pipe - Double Wall Stove Pipe cannot be cut and still provide a proper connection to an adjoining piece of pipe. Available to achieve pipe length requirements not attainable with fixed lengths of DVL. There is approximately 3" of adjustment on the 6" length and 7" of adjustment on the 12" length of pipe. All pieces must have a minimum 1" overlap with all connecting pipe.
Oval-to-Round Boot - Connects DVL pipe to Vermont Castings Stoves with oval flue outlets. 6 5/8" X 9 1/2" inside diameter. Overall height is 14 1/2". Installed height is 13 9/16".