Red Hill General Store
Call to order toll free 1-800-251-8824
Shopping Cart

Black 8 inch 22 Gauge HeatFab Saf-T Pipe Single Wall Stove Pipe

Saf-T Pipe is the highest quality stove pipe available for coal and wood-burning stoves, fireplaces and central heaters. Manufactured for optimal system performance, Saf-T Pipe is unmatched in safety, durability and ease of installation. Saf-T Pipe is made from 22-gauge cold-rolled steel, which is up to 60% thicker than snap-lock single wall stove pipes. With an invisible seam, finished with high-quality silicone-based black stove paint, it looks as smart as it performs. Decorative, laser-cut wall collars can be specified to finish applications with extra flair.Innovative, efficient technology makes Saf-T Pipe a superior fitting system. Continuous-seam laser welding delivers a product that fits consistently – because it’s consistently round. Saf-T Pipe retains its shape, even when cut. Since Saf-T Pipe doesn’t have to be snapped together, it’s quicker to install – and it can’t come apart, even in case of fire (especially in the case of fire). Joints fit perfectly to ensure tight, safe venting and eliminate the release of soot and flue gas to interior environments. It’s secure, reliable and virtually smoke-free.

Laser-welded seams
Will last many times longer than 24 gauge pipe
Inside of each piece painted to prevent flash rust.
Full range of parts and sizes
Beaded for furnace cement
High-temperature, low-luster finish
Individually wrapped

This item is not available for our Ship to Store Service
Order Item
12" Straight Pipe
8" x 12"
Ocp21310
$36.49
7 lbs
Add to Cart
18" Straight Pipe
8" x 18"
Ocp21315
$45.99
7.88 lbs
Add to Cart
24" Straight Pipe
8" x 24"
Ocp21320
$54.49
10 lbs
Add to Cart
36" Straight Pipe
8" x 36"
Ocp21325
$73.99
13.75 lbs
Add to Cart
45 Degree Elbow
8"
Ocp21340
$50.99
6.5 lbs
Add to Cart
48" Straight Pipe
(Case of 2)
8" x 48"
Ocp21330
$193.49
28 lbs
Add to Cart
90 Degree Elbow
8"
Ocp21350
$61.49
8 lbs
Add to Cart
Adjustable Elbow
8"
Ocp21353
$89.49
8.25 lbs
Add to Cart
Increaser
8"
Ocp21380
$49.49
7 lbs
Add to Cart
Oval to Round Boot 1
See notes
Ocp21375
$117.99
6.25 lbs
Add to Cart
Oval to Round Boot 2
See notes
Ocp21376
$89.49
6.5 lbs
Add to Cart
Reducer
8"
Ocp21180
$58.99
5 lbs
Add to Cart
Slip Connector
8" x 18"
Ocp21370
$49.49
8 lbs
Add to Cart
Tee Cap
8"
Ocp21365
$62.49
5.25 lbs
Add to Cart
Tee Connector
8" x 12"
Ocp21355
$81.49
7 lbs
Add to Cart
Tee Joint
8"
Ocp21360
$82.99
8 lbs
Add to Cart
Telescoping Length
38"-70"
Ocp21335
$173.99
22 lbs
Add to Cart
Trim Collar
8"
Ocp21305
$30.99
5 lbs
Add to Cart

Black 8 inch 22 Gauge HeatFab Saf-T Pipe Single Wall Stove Pipe

Heatfab

Description of available pieces
Straight Pipe -
Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
45 degree Elbow - Offsets obstructions as needed. Non-adjustable.
90 degree Elbow - Offsets obstructions as needed. Non-adjustable. Not recommended for rear exit appliances.
Adjustable Elbow - 90° sectioned. Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle.
Increaser
- Easily adapts smaller stove pipe to larger stove pipe. 8" (female) to 6" (male)-male end is crimped.
Reducer - Easily adapts large stove pipe to smaller stove pipe. 6" (female) to 8" (male)-male end is crimped.
Slip Connector -
18" length. Use to adapt pipe to ceiling support box or finishing collar. Adds 4” - 16” of length to rigid pipe. Allows drip-free installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe.
Tee Connector - Provides a connection between Heat-Fab 22-ga. Black Stovepipe and a tee with a female take-off. 12" long and has two male ends.
Tee Joint - Both sections assembled with "Snaplock" seam. Can be easily turned to make a secure lock.
Tee Cap - Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning.
Telescoping Length - Use for a two-piece installation. Connects directly from stove to ceiling support box or finishing collar. Adjusts from 38"-70". No cutting required.
Trim Collar - Covers excess area around flue opening. Provides a finished look to stove pipe installation.
Oval-to-Round Boot 1 - Oval-to-8" round offset boot for Vermont Castings Stoves. The oval male end
dimension is 53/8" X 93/4". The round female end accepts 8" diameter, 22-ga. stovepipe
Oval-to-Round Boot 2 - Oval-to-8" round straight boot for Vermont Castings Stoves. The oval male end
dimension is 53/8" X 93/4". The round female end accepts 8" diameter, 22-ga. stovepipe
Spacer Line
Frequently asked questions about Stove Pipe

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page

Spacer Line
Find us on Twitter Follow us on Facebook Read our Red Hill General Store Blog Visit our Channel on Youtube Secure Ordering Privacy Policy Black 8 inch 22 Gauge HeatFab Saf-T Pipe Single Wall Stove Pipe