Click here for frequently asked questions about Stove Pipe

Black 7 inch DuraVent DuraBlack Single Wall Stove Pipe

Single wall stove pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney. For an economical, drip-free, single-wall stovepipe, DuraBlack is an excellent choice. Built to high standards, DuraBlack is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. Please note: All of the Black 7 inch DuraVent DuraBlack Single Wall Stove Pipe on this page is 24 gauge.

24-Gauge
Spot-welded lock seams
18" clearance to combustibles

Order Item

Item	Size	Item #	Price	Weight	Buy
12" Straight Pipe	7" x 12"	Ocp114988	$43.49	4.6 lbs
24" Straight Pipe	7" x 24"	Ocp114989	$55.49	7.75 lbs
90 Degree Elbow	7"	Ocp69044	$89.99	6.25 lbs
Double-Skirted Stovetop Adapter	7"	Ocp69048	$104.49	6.5 lbs
Slip Connector	7"	Ocp114990	$80.49	7 lbs
Snap-Lock Adapter with Trim	7"	Ocp114994	$128.49	1 lbs
Stovetop Adaptor	7"	Ocp69046	$70.99	4.5 lbs
Trim Collar	7"	Ocp69049	$56.99	4.5 lbs

Black 7 inch DuraVent DuraBlack Single Wall Stove Pipe

Description of available pieces
Straight Pipe - Use for a single-wall connector pipe. Requires 18” clearance to combustibles.
45 degree Elbow - Offsets obstructions as needed. Elbows angles are now adjustable. Adjustable elbows are manufactured drip free so creosote travels back to the stove as intended.
90 degree Elbow - Offsets obstructions as needed. Elbows angles are now adjustable. Adjustable elbows are manufactured drip free so creosote travels back to the stove as intended. Not recommended for rear exit appliances.
Double-Skirted Stovetop Adapter - Use to adapt DuraBlack stovepipe to appliance flue outlets. Outer wall covers appliance flue outlet.
Slip Connector - Use to adapt DuraBlack pipe to ceiling support box or finishing collar. Adds 3” - 13” of length to rigid pipe. Allows drip-free
installation without cutting the pipe. Can be used in line to create a telescoping combination when used with a straight length of pipe.
Snap-Lock Adapter with Trim - Snaps into the ceiling support box or finishing collar and extends down to fit into stovepipe for a drip-free connection to a DuraTech, DuraPlus, DuraPlus HTC, or DuraLiner Chimney system. Provides a strong mechanical connection. Adapter will work with all 6”-8” DuraPlus, 6”-8” DuraPlus HTC, and 7”-8” DuraTech installations.
Adapter will work with 5”-6” DuraTech Ceiling Support Box installations only.
Stovetop Adaptor (Starter Pipe) - Use to adapt DuraBlack stovepipe to appliance flue outlet.
Trim Collar - Use as a decorative Trim Collar for DuraBlack connection to chimney.

Frequently asked questions about Stove Pipe

1. How do I determine what size stove pipe I need?
2. What's the difference between single wall and double wall stove pipe?
3. Should stove pipe be installed with the male end up or down?

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page

M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech®, DuraPlus HTC®, DuraChimney® II, PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal® W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent’s relining products including DuraLiner®, DuraFlex® (SW, Pro, 316, 304), and Ventinox®.

• Any M&G DuraVent product sold by a non-approved website will not be warranted.

• Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent.

• Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent’s trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy.