Canning Jar Rubber Rings
Ideal for older style glass canning and fruit
jars. Seal and store a variety of items safely. Three of our rubber
rings come with tabs for easily breaking the seal.
|
|
Picture |
Description |
Item # |
Weight |
Price |
Buy |
| |
Viceroy
Rubber Fruit Jar Rings
Ideal for older style glass canning and fruit jars. Seal and store
a variety of items safely.
For use on Corona, Jewel, Crown & Gem Jars
One dozen rings
2 1/4" Inner diameter
2 3/4" Outer diameter |
Opc912000 |
0.5 lbs |
$2.99 |
|
| |
Viceroy
PerfectSeal Sealing Ring
Replacement seal ring for glass and pottery storage jars. Includes
tab for breaking seal.
2 1/2" Inner diameter
3 1/2" Outer diameter |
Opc912005 |
0.5 lbs |
$2.99 |
|
| |
Viceroy
Regular Mouth Jar Rubbers
Fits regular mouth Ball & other wire-clamp jars. Seal and store
a variety of items safely. Includes tab for easily breaking seal.
One dozen rings
2 1/4" Inner diameter
2 3/4" Outer diameter |
Opc912006 |
0.5 lbs |
$2.49 |
|
| |
Viceroy
Wide Mouth Jar Rubbers
Fits wide mouth Ball & other wire-clamp jars. Seal and store
a variety of items safely. Includes tab for easily breaking seal.
One dozen rings
2 7/8" Inner diameter
3 5/8" Outer diameter |
Opc912007 |
0.5 lbs |
$3.49 |
|
 |
Tattler Replacement Regular
Rubber Rings
Tattler Reusable Rubber Rings ONLY, NO LIDS - Regular Mouth Jar
One dozen rings |
Opc1regring |
0.3 lbs |
$6.99 |
|
 |
Tattler Replacement Wide Mouth
Rubber Rings
Tattler Reusable Wide Mouth Rubber Rings ONLY, NO LIDS - Wide Mouth
Jar.
One dozen rings |
Opc1wmring |
0.3 lbs |
$7.99 |
|
From Tattler
Tattler Reusable Canning Lid Usage
Tattler Lids do require a bit of variation from conventional metal lids. Being a two piece combination with a rubber gasket ring, Tattler Lids must remain a bit loose during processing in order for the jar to vent the pressure that has built in the jar during processing. An online customer gave us a very good tip on how tight is 'Just Right'. To get the feel for the correct tightness prior to processing, place the jar on a counter top or other smooth surface, then place your index finger on the lid (do not apply too much pressure while tightening the metal band). Screw the metal band on until the jar begins to spin on the counter top (or other smooth surface). This is the perfect tightness for processing!
The Following Final Step Is Crucial To Ensure A Good Seal:
Once the process is completed and the jars are removed from your canner, Let the bubbling die down (approximately 4-5 minutes), as this is pressure still releasing from the jars. Place a towel over the still hot jars (for safety) and finish tightening the metal bands. Now, let your jars cool naturally and when cool to room temperature, remove the metal band and lift the jar slightly by the lid. It should be well sealed. Your food is ready for storing (store without metal screw bands).
|
