Galvanized 6 inch Single Wall Stove Pipe

Galvanized 6 inch Single Wall Stove Pipe

High quality galvanized 6 inch 28 gauge single wall stove pipe. Single wall stove pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney.
Click here for frequently asked questions about Stove Pipe

Galvanized 6 inch Single Wall Straight Stove Pipe

Straight Pipe is entirely self-locking. No tools needed to close seams. Put together by simply inserting tongue on one edge and pressing together until it snaps. Joint can be cut to any length without destroying the lock.

Item	Size	Gauge	Item #	Price	Weight	Buy
24" Galvanized Straight Pipe	6" X 24"	28	B17312968	$5.99	2 lbs

Galvanized 6 inch Single Wall Stove Pipe Elbows

90 degree Elbow - Corrugated lock seamed, one piece construction. Lock seamed for strength and to prevent coming apart. 2 1/2" ends.
Adjustable Elbow - Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle.

Order Item

Item	Size	Gauge	Item #	Price	Weight	Buy
6" Galvanized 90 Degree Elbow	6"	28	B17312091	$7.99	2 lbs
6" Galvanized Adjustable Elbow	6"	28	B17313164	$8.99	2 lbs

Frequently asked questions about Stove Pipe

1. How do I determine what size stove pipe I need?
2. What's the difference between single wall and double wall stove pipe?
3. Should stove pipe be installed with the male end up or down?

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page