Blue 4 inch Single Wall Stove Pipe - Red Hill General Store

Blue 4 inch Single Wall Stove Pipe

High quality blue 4 inch 28 gauge single wall stove pipe. Single wall stove pipe is ideal for installations where there is a minimum 18" clearance from the stove until it enters the chimney.
Click here for frequently asked questions about Stove Pipe

Blue 4 inch Single Wall Straight Stove Pipe

Straight Pipe is entirely self-locking. No tools needed to close seams. Put together by simply inserting tongue on one edge and pressing together until it snaps. Joint can be cut to any length without destroying the lock.

Item	Size	Gauge	Item #	Price	Weight	Buy
24" Blue Straight Pipe	4" X 24"	28	B17310954	$5.99	2 lbs

Blue 4 inch Single Wall Stove Pipe Elbows

90 degree Elbow - Corrugated lock seamed, one piece construction. Lock seamed for strength and to prevent coming apart. 2 1/2" ends.
Adjustable Elbow - Double seams permit each section to turn freely without any danger of becoming disconnected. Can quickly be adjusted to any straight line and a right angle.

Order Item

Item	Size	Gauge	Item #	Price	Weight	Buy
4" Blue 90 Degree Elbow	4"	28	B17313073	$6.49	1.5 lbs
4" Blue Adjustable Elbow	4"	28	B17310830	$8.49	1.5 lbs

Blue 4 inch Single Wall Stove Pipe Increaser

Increaser - Easily adapts smaller stove pipe to larger stove pipe. Large end of Increaser is crimped.

Order Item

Item	Increases Size	Gauge	Item #	Price	Weight	Buy
4" Blue Increaser	From 4" to 6" pipe	28	B17311879	$9.99	1.5 lbs

Blue 4 inch Single Wall Stove Pipe Trim Collar

Trim Collar - Covers excess area around flue opening. Provides a finished look to stove pipe installation.

Order Item

Item	Size	Gauge	Item #	Price	Weight	Buy
4" Blue Trim Collar	4"	28	B17314378	$4.49	1 lbs

Frequently asked questions about Stove Pipe

1. How do I determine what size stove pipe I need?
2. What's the difference between single wall and double wall stove pipe?
3. Should stove pipe be installed with the male end up or down?

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page