Bookmark and Share
Black 8 inch Selkirk Superpipe Double Wall Stove Pipe

Selkirk Superpipe Double Wall Stove Pipe features an advanced engineering design and premium materials. Double Wall construction with a 1/4” air space between inner and outer pipes provides a superior insulating value than single wall pipe. Better insulating value keeps flue gas temperatures higher. This helps your woodstove perform with an enhanced draft, which provides: Less chance of moisture or soot build up within the vent, reduced “smoking” of the stove at start up, increased efficiency & less creosote build up. Double Wall Stove Pipe not only keeps the flue temperatures higher, it also keeps the outer pipe temperatures cooler. Selkirk Superpipe Double Wall Stove Pipe can be installed with only 6” of clearance to combustible materials. Single Wall Stove Pipe requires an 18” clearance, which typically means your woodstove sits further away from the wall and takes up valuable space within the room. The black finish of Selkirk Superpipe provides a very rich and distinguished appearance. Black enamel paint is used to provide a long lasting, brighter finish that also resists scratches. All Selkirk Superpipe is constructed of a 26 gauge outer pipe with a .015" 430 alloy stainless steel inner liner. Selkirk Superpipe is listed to ULC S641 and UL 103 Standards - your guarantee of safety. Limited manufacturer's lifetime warranty.
Please note:
For Installed length, subtract 1 3/8" per joint. Double Wall Stove Pipe cannot be cut and still provide a proper connection to an adjoining piece of pipe. If necessary use an adjustable length of double wall stove pipe. When installing Superpipe the joints appear to be going the wrong direction with a "male-end-up" connection. This is correct for the outer wall. The inner wall is opposite and provides a "male-end-down" connection. Use the finishing band to conceal the wrong appearing joint.
Click here for frequently asked questions about Stove Pipe

Selkirk Superpipe Black 8 inch Double Wall Straight Stove Pipe
Selkirk Superpipe Black 8 inch Double Wall Straight Stove Pipe
Straight Pipe - 3 metal screws supplied with each length. For installed length, subtract 1-3/8" per joint.
6" Black Straight Pipe
8" X 6"
Ocp77505
$32.99
2 lbs
12" Black Straight Pipe
8" X 12"
Ocp77510
$43.99
3 lbs
24" Black Straight Pipe
8" X 24"
Ocp77515
$69.49
7.5 lbs
36" Black Straight Pipe
8" X 36"
Ocp77520
$80.49
11 lbs
Selkirk Superpipe Black 8 inch Double Wall Telescoping Stove Pipe
Selkirk Superpipe Black 8 inch Double Wall Adjustable Length Stove Pipe
Telescoping Pipe - Great for one piece installation. Simply adjust to the length you need. Includes Finishing Band. Easily removable for inspection and cleaning. Eliminates the need to cut pipe. For installed length, subtract 1-3/8" per joint.
8" Telescoping Pipe
12-18"
Ocp77525
$54.99
6 lbs
8" Telescoping Pipe
38-68"
Ocp77530
$151.99
21 lbs
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Elbows
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Elbows
45 degree Elbow - Used to offset Double Wall Stove Pipe toward insulated chimney. Non-positional connection system allows 360 degree rotation.
90 degree Elbow
- Used to offset Double Wall Stove Pipe toward insulated chimney in a through-the-wall
installation. Non-positional connection system allows 360 degree rotation.
Order Item
8" Black 45 Degree Elbow
8"
Ocp77545
$54.99
3 lbs
8" Black 90 Degree Elbow
8"
Ocp77550
$75.99
5.5 lbs
Selkirk Superpipe Black 8 inch Double Wall Tee Joint with Cover
Selkirk Superpipe Black 8 inch Double Wall Tee Joint with Cover
Tee Joint - Used in conjunction with a vertical insulated chimney to provide easy access for inspection and cleaning. Includes Cap.
Order Item
8" Black Tee Joint
8" X 8" X 8"
Ocp77535
$67.99
4.5 lbs
Selkirk Superpipe Black 8 inch Double Wall Finishing Band
Selkirk Superpipe Black 8 inch Double Wall Finishing Band
Finishing Band - Used to conceal the crimped end on the last length in the system. The finishing band conceals the joints and provides a finished look. When installing Superpipe the joints appear to be going the wrong direction with a "male-end-up" connection. This is correct for the outer wall. The inner wall is opposite and provides a "male-end-down" connection. This part conceals this wrong appearing joint.
Order Item
8" Black Finishing Band
8"
Ocp77375
$10.99
1 lbs
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Damper Kit
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Damper Kit
Damper Kit - Allows the operator to alter the amount of air drawn through the venting system, controlling the stove’s combustion. Must be installed directly on the stove’s flue outlet. When handle is in horizontal position, the damper is “closed” (reducing combustion). The “closed” position is still 20% open, so the venting system is not completely blocked. When handle is in vertical position, the damper is wide open (no reduction of combustion).
Order Item
8" Damper Kit
8"
Ocp77540
$58.49
3.5 lbs
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Stove Adaptor
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Damper Kit
Stove Adaptor - May be required to adapt some stove flue outlets to Double Wall Stove Pipe. Used to connect Superpipe to the stove, this adaptor's inner wall fits into the collar on the top of the stove, and the outside fits over the outside wall of the stove collar. The installed stove adaptor displaces 4 1/4" of pipe.
Order Item
8" Stove Adaptor
8"
Ocp77560
$34.99
2 lbs
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Masonry Adaptor
Selkirk Superpipe Black 8 inch Double Wall Stove Pipe Damper Kit
Masonry Adaptor - For installations through a masonry wall. Used to connect Double Wall Stove Pipe to an existing masonry chimney or a relined masonry chimney with stainless steel liner. The Superpipe Masonry Adaptor mates Superpipe directly to a masonry chimney. If you need a thimble to work with Superpipe this is the one. Overall length is 11 1/4" the part that inserts into the chimney is 9". Compatible only with Selkirk Superpipe Double Wall Stove Pipe.
Order Item
8" Masonry Adaptor
8"
Ocp77555
$41.99
3 lbs
Frequently asked questions about Stove Pipe

Please note: For safety considerations and ease of installation follow these guidelines.
1. Never mix and match gauges of stove pipe.
2. Use a stove pipe reducer or increaser if you are working with different sizes of pipe.
3. Buy all of the pipe you need from one brand. The connection will most likely differ from Brand X to Brand Y.
4. While all of the stove pipe we sell will fit together tightly a very secure connection can be obtained by using 3 screws per connection. Screws also make the entire assembly stronger.
5. New stove pipe may smoke a little and emit an odor when first used. This is normal and nothing to be concerned about. It is simply the paint on the pipe curing a bit. If necessary open a window or door to allow the smoke and fumes to escape.
Return to top of page
2 visitors online