![]() |
|
|
| Wood Stove Accessory > Stove Pipe > Single Wall Stove Pipe > Black 8 inch 22 Gauge Single Wall Stove Pipe |
|
||
| Heat-Fab Black 8 inch 22 Gauge Single Wall Straight Stove Pipe Straight Pipe - Laser and Advanced Resistance-welded seams makes snap together pipe obsolete. Guarantees a completely sealed seam: no smoke or flue leakage. |
|
||||||||||||||||||||||||||||||||||||||||||
| Heat-Fab Black 8 inch 22 Gauge Single Wall Adjustable Length Stove
Pipe Adjustable Length Pipe - Eliminates time consuming cutting and crimping to get a "just right" installation. Great for stove to ceiling installation. |
|
||||||||||||||||||||||||||||||||||||||||||
| Heat-Fab Black 8 inch 22 Gauge Single Wall Slip Connector Stove
Pipe Slip Connector - Helps when the installation doesn't come out "just right". Slides down into another piece of pipe to make an adjustable length. 18" length, adjusts 4" to 16". |
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge
Single Wall Stove Pipe Elbows 45 degree Elbow - Corrugated, designed for strength. One piece so it won't leak or separate. 90 degree Elbow - Corrugated, strong won't leak. Provides years of use. Adjustable Elbow - Rugged, resists seperating at joints. Adjusts up to 90 degrees, with a three sectioned adjustment. |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge Single Wall
Stove Pipe Tee Joint Tee Joint - Laser and Advanced Resistance-welded seams makes snap together pipe obsolete. Guarantees a completely sealed seam: no smoke or flue leakage. |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge Single Wall
Stove Pipe Tee Cap Tee Cap - Used to close off one end of a stove pipe tee. Use of a tee cap allows for easy access for pipe cleaning. |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge Single Wall
Stove Pipe Tee Connector Tee Connector - Provides a male end down connection between tee joint with female take-off (Such as Heat-Fab tee sold above) and woodstove. Two male ends. 12" length. |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge Single Wall
Stove Pipe Trim Collar Trim Collar - Covers excess area around flue opening. Provides a finished look to stove pipe installation. Outer diameter is 14". |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-fab 22-ga Welded Black Stovepipe Reducer |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-fab 22-ga Welded Black Stovepipe Increaser
Increaser - 8" Female To 6" Male Heat-fab 22-ga Welded Black Stovepipe Increaser - Male End Is Crimped |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
Heat-Fab Black 8 inch 22 Gauge Single Wall
Oval-to-Round Boots for Vermont Castings Stoves Oval-to-Round Boots - The easy way to connect 8" stovepipe to most Vermont Castings Stoves with an oval flue collar. The offset boot is 9 1/2" high with a male end dimension of 5 3/8 X 9 3/4". The straight boot is 11 1/2" high. The round female end on both boots accepts 8" 22 gauge stovepipe. |
Order Item
|
||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||
| About
Us | Contact Us | Frequently
Asked Questions | Help | Site
Map Shopping Cart | Checkout | Privacy Statement | Return Policy | Secure Ordering | Shipping Information Place your order online or call us at 1-800-251-8824 Copyright Red Hill General Store ©2009 All Rights Reserved. Use of this site is subject to certain Terms of Use. |